OWC Mercury Elite Pro Dual Raid with USB 3 2TB

The OWC Mercury Elite Pro Dual Raid with USB 3 2TB is pre-configured for RAID 0 via hardware and the array itself is designed for creative workflows, HD video, project archives, and system backups in environments ranging from production studios to home offices. 

Within the array are two SATA III 3.5" drive bays that each house a single 1TB 7200 rpm SATA III 3.5" hard drive. Since the array ships with two drives, they can be hardware configured as RAID 0, 1, SPAN, or Independent modes, each of which offers performance, data redundancy, or a combination of both. However, please be aware this array is preconfigured as a RAID 0 volume, which provides increased read and write speeds, but no data redundancy.

When using the single USB 3.0/3.1 Gen 1 port, this volume will be recognized on systems running OS X 10.6.8 and later, Windows XP or later, and Linux Kernel v. 2.6.31 or later. When connected via one of the dual FireWire 800 ports, the Windows and Linux requirements remain the same, although OS X 10.2 and later are supported. When connected to a compatible Mac via USB 3.0/2.0 or FireWire 800, the Mercury Elite Pro Dual may also be used as a boot drive, except when using Boot Camp. To help ensure a smooth operating environment, the array uses a cooling fan, and its included 100~240 VAC power supply runs at 50/60 Hz to help ensure worldwide compatibility.

Also included with the OWC Mercury Elite Pro Dual is a 2.0' USB 3.0 Type-B to Type-A cable, a 1.0' FireWire 800 cable, and a power cable. Protection is provided by a limited 3-year warranty that includes complimentary Level 1 data recovery for one year.

Hardware RAID:

The two 3.5" hard drives in the Mercury Elite Pro Dual come configured in a high-speed RAID 0 mode for maximum sustained performance. With speeds up to 388 MB/s, the drives are fast enough for HD video workflows. You may reconfigure the Mercury Elite Pro Dual with a flick of a switch in RAID 1 mode for extra security of mirrored data, as a single span of the two drives, or two independent disks.

FEATURES:

• 2 x 1TB 7200 rpm 3.5" Hard Drives
• 2 x SATA III 3.5" Drive Bays
• 1 x USB 3.0/3.1 Gen 1 Port
• 2 x FireWire 800 Ports
• RAID 0, 1, SPAN, and Independent Modes
• Preconfigured in RAID 0
• Hardware RAID Controller
• Data Transfer Speeds up to 388 MB/s
• Aluminum Enclosure with Low-Decibel Fan
• Windows, Mac, and Linux Compatible