Quasar Science Q-Lion LED Lamp Kit

In stock
SKU
Quasar-FT-Kit
Grouped product items
Product Name Qty
Quasar Science 1' (12") Q-Lion Battery Powered LED Lamp
$200.00
4.5" Suction / Vacuum Cup with 3/8-16 Spud
$39.95
Ultralight Control Systems Clamp
$29.95
Ultralight Control Systems Ball Base Adapter - 1/4-20" Male
$22.95
Matthews MQ Mount for T-12 Tubes
$69.00
Filmtools 1/4-20" to 3/8-16" Adapter
$4.99
  • Quasar Science 12" Q-Lion Battery Powered LED Lamp
  • 4.5" vacuum/ suction cup with aluminum metal mount
  • Matthews MQ Mount for T-12 Tubes
  • AC-CSF Clamp by Ultralight Control Systems 
  • 1/4-20 Ball Adapter by Ultralight Control Systems
  • Filmtools 1/4-20" to 3/8-16" Adapter

The Quasar Science Q-Lion LED Lamp Kit is made up of a Quasar Science 12" Q-Lion Battery Powered LED Lamp, a 4.5" vacuum/ suction cup with aluminum metal mount that includes a 3/8-16 thread stud, a Matthews MQ Mount for T-12 Tubes, an Ultralight Control Systems Clamp, an Ultralight Control Systems 1/4-20" Male Ball Base Adapter and a 1/4-20" to 3/8-16" Adapter. The Quasar Science Q-Lion LED Lamp Kit is ideal to have for a shoot inside a car, allowing you to mount your Quasar LED to your windshield or windows.  

Quasar Science 12" Q-Lion Battery Powered LED Lamp

The Quasar Science 12" Q-Lion Battery Powered LED Lamp can provide your set with vibrant, flicker-free, and illuminating light. The LED lamp is battery powered and can last up to 4 hours when they are fully charged. To operate the lamp, simply press the button once to turn it on, press the button multiple time to dim the lamp (100%, 75%, 50%, 25%, 10%, OFF), and press and hold the button when changing from 3000k to 5600k.

It is also possible to disable to Power Button when traveling so it does not turn on and drain during your travels. For this, you would need to use a pen to hold the KILL button ont he side for 5 seconds. When you need to reactivate the light, simply plug it into your charger.

Please note: To maximize battery life, the lamp can not operate while charging.

Key Features:

Color Temperature: 3000k/5600k
Press and hold the power button to alternate between color modes.

Dimming Levels: 100%, 75%, 50%, 25%, 10% OFF
A single button press cycles through the dimming levels

Features:

  • Magnetic Feet
  • 3/8" Threaded Receiver
  • Recessed Power Button
  • Kill switch to disable power button when traveling (V2)

Power:

  • Rechargeable Lithium Ion Battery
  • Charges from Mirco USB power adapter - V3.0 -9V @2A / 12V 1.5A - Will not charge on standard 5v USB Charger
  • Battery Level Indicator

Runs for about 4 hours at full charge

Color Rendering Index:

  • 95 CRI +
  • Flicker Free
  • 25,000 + Hour Lifetime

Operation:

  • Press button once to turn on.
  • Press multiple times to dim.
  • Press and hold to change from 3000k to 5600k.

4.5" Suction / Vacuum Cup with 3/8-16 Spud

4.5" vacuum/ suction cup with aluminum metal mount, 3/8-16 thread stud. Capacity: 40 lbs. Supplied with pad protector.

Ideal for use in conjunction with ball-heads for light weight video cameras. Perfect for rigging cameras on cars or any smooth non-porous surface. A spring-balanced pump ensures a consistent vacuum level and a red-line indicator warns if there is any drop in holding power. Just a few strokes on the plunger will remove the air from between the mount's vacuum pad and the mounting surface. As long as the mount maintains a reliable hold, the plunger remains partially hidden inside the pump and the red line is not visible. If the red line appears, another stroke or two will restore full holding power. A firm push or pull on the rubber tab at the edge of the pad releases the mount.

Features

  • Durable polycarbonate accessory mount with threaded stud for attaching equipment.
  • Studs available in various lengths.
  • Attaches to flat or curved, smooth, nonporous surfaces.
  • Red-line indicator warns user of any vacuum loss.
  • Check valve allows repumping without loss of remaining vacuum.
  • Lift tabs on pad edges permit instant release.
  • Supplied with pad protector.

Matthews MQ Mount for T-12 Tubes

The Matthews MQ Mount for T-12 Tubes was designed to clamp T-12 light tube fixtures with minimal light loss, without crushing the tube. The Matthews MQ Mount for T-12 Tubes terminates in an industry standard 3/8" pin which fits any standard grip head. The Matthews MQ Mount for T-12 Tubes can work with both flouresent and LED lighting. This versatile piece of equipment is a must have for your grip truck!

  • Fits T-12 Tubes
  • Works with both flouresent and LED lighting
  • Made from light-weight plastic and aluminum

Ultralight Control Systems Clamp

The new AC-CSF Clamp by Ultralight Control Systems marries the base ball to the ball end of the various length ball arms. The clamp can be tightened so that the rig is rigid, or slightly flexible for easy adjustments...your choice.

Ultralight Control Systems Ball Base Adapter - 1/4-20" Male

The 1/4-20 & 3/8-16 Ball Adapters by Ultralight Control Systems have standard threads to attach them to most cameras and monitors. The Female Shoe Mount is listed here as well.

Filmtools 1/4-20" to 3/8-16" Adapter

The Filmtools 1/4-20" to 3/8-16" Adapter that has multiple uses including being an accessory for cameras and lighting fixtures.

More Information
SKU Quasar-FT-Kit
Specifications

Quasar Science 12" Q-Lion Battery Powered LED Lamp

Length Q10 - 12" 10 watt - 6,700 mAh LiOn Battery
Color Temperature 3000k/5600k
Dimming Levels 100%, 75%, 50%, 25%, 10%, OFF
Features
  • Magnetic Feet
  • 3/8" Threaded Receiver
  • Recessed Power Button
  • Kill switch to disable power button when traveling (V2)
Power
  • Rechargeable Lithium Ion Battery
  • Charges from Micro USB power adapter - V3.0 -9V @2A / 12V 1.5A
  • To maximize battery life, the lamp can not operate while charging
Color Rendering Index
  • 95 CRI +
  • Flicker Free
  • 25,000 + Hour Lifetime
Operation
  • Press button once to turn on
  • Press multiple times to dim
  • Press and hold to change from 3000k to 5600k

Matthews MQ Mount for T-12 Tubes

Material Aluminum and plastic
Compatibility T-12 size fluorescent or LED tubes
Dimensions Pin Diameter: 3/8" / 9.5 mm
Pin Tap: 1/4"-20

Related products

Check items to add to the cart or
Customer Reviews Copyright © 2019 Filmtools, a Magnasync/Moviola Company.