RigWheels PortaRail Collapsible Speed Rail with Six 40" Sections & Four Connectors

The RigWheels PortaRail Collapsible Speed Rail with Six 40" Sections & Four Connectors includes 6 40" sections, 4 threaded connectors, and 12 rubber end caps. These 40" sections can be slid together using the connectors to make two 120" rails for the PortaRail collapsible dolly/slider rail system (not included) with the RigWheels PortaRail Collapsible Speed Rail.

The rails are constructed from 6061 aluminum for rigidity, and provide precision camera movement. At 80", the camera slider rails have less than 1/8" of flex with a 40 lb load placed at the center. These rods can also be used with other suspended or ground rail systems that work with an outer diameter of 1.65". All parts are made in the USA.

Note:

This kit includes only rails and connectors. The dolly/slider is not part of the bundle and must be purchased separately.

RigWheels PortaRail Speed Rail Camera Slider Rod (40" Section)

The PortaRail Speed Rail Camera Slider Rod from RigWheels is a 40" section rod designed for the PortaRail collapsible dolly/slider rail system. The rod is 40" long and can be screwed together via the threaded connectors. The rod is constructed of 6061 aluminum and designed to provide more rigidity. Each piece goes through a 6-step process that makes them straight and round for precision camera movement. You can add as many sections as you need for longer shots. This rod can also be used with other suspended or ground-rail systems that work with a 42mm outer diameter.

• 6061 aluminum construction

• Made in the USA

RigWheels PRC1 PortaRail Speed Rail Connector

The PRC1 PortaRail Speed Rail Connector from RigWheels is used to connect PortaRail Collapsible Rail products.