Rode Battery or Phantom Powered Condenser Shotgun Microphone
- Rugged metal body
- Excellent feedback rejection
- High sound pressure handling capability
- Shock-mounted capsule provides excellent suppression of handling noise
- Uniform on- and off-axis response
- Cardioid pick-up pattern provides isolation from other on-stage signals
- Hum compensating coil
The RODE NTG2 Shotgun Microphone is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.
In addition to the NTG2 native 20Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The RODE NTG2 shotgun microphone is covered by RODE Microphones' industry leading 10 year warranty.
RODE NTG2 Shotgun Microphone Specifications
|Acoustic Principle||Line Gradient|
|Active Electronics||JFET impedance convertor with balanced transformer output|
|Frequency Range||20Hz - 20kHz|
|Maximum SPL||131dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Maximum Output Level||6.9dBu (@ 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||18dB-A|
|Power Options||+48V phantom powerAA Battery|
|Dimensions||280.00mmH x 22.00mmW x 22.00mmD|
|Warranty||1 year with free extension to 10 years following registration here|
- (1) NTG-2 Shotgun Microphone
- (1) Microphone Stand Adapter
- (1) Microphone Foam Windscreen
- (1) 5/8" to 3/8" thread reducer