Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Rosco TruColor Infrared Camera Filter

$225.00
In stock
SKU
11511
MPN
120480104570
  • Material: Optical grade borosilicate glass
  • Thickness: 3.3mm
  • Coating: Dielectric, high vacuum deposition (10 -6 torr)
  • Mechanical: Mil C-48497 - Adhesion and Abrasion
  • Restores proper color saturation

Rosco TruColor Infrared Camera Filter restores proper color saturation in situations where the use of heavy neutral density filter washes out color balance in a composition.

It is commonplace for a camera operator to use Neutral Density camera filters in the course of composing and balancing a shot. But when used with some digital video camera's these ND filters can adversely desaturate the color balance of the shot. Inherently sensitive to infrared light, the digital sensors in the camera can become overwhelmed by the imbalance between the visible light which has been attenuated by the ND filter and the infrared light which is unaffected by the ND.

The Rosco TruColor IR filter balances the visible and infrared light allowing the camera sensors to render proper color saturation and restores the color fidelity in the finished composition. Sharp cut-offs below 390nm and above 720nm restore the balance of visible and invisible light reaching the camera sensors This Rosco TruColor IR Camera Filter has been recommended by numerous professionals - especially those involved in using this filter with the Red One Camera Systems Specifications:

  • Material: Optical grade borosilicate glass
  • Thickness: 3.3mm
  • Coating: Dielectric, high vacuum deposition (10 -6 torr)
  • Mechanical: Mil C-48497 - Adhesion and Abrasion
More Information
SKU 11511
Specifications N/A
Write Your Own Review
You're reviewing:Rosco TruColor Infrared Camera Filter
Your Rating
Copyright © 2018 Filmtools, a Magnasync/Moviola Company.