SHAPE Cage with Matte Box and Follow Focus Kit for Panasonic Lumix S1/S1R/S1H

The SHAPE Cage with Matte Box and Follow Focus Kit for Panasonic Lumix S1/S1R/S1H is specifically designed for the Panasonic Lumix S1, S1H, or S1R camera. This kit includes a camera cage with top handle and 15mm rod system, a Metabones adapter support bracket, a 4 x 5.6 matte box, and a single-rod follow focus system. The cage allows access to all controls and ports on the camera.

The cage includes a cable protector to secure and prevent the HDMI cable from pulling. Both the cage and included handle feature 1/4"-20 and 3/8"-16 threaded holes for attaching accessories. With push-button technology, this cage allows fast and easy adjustment with 360° rotation at just one push of the button. The top handle is lined with wood for comfort and extra grip.

Built with durable aluminum, this cage features a quick release plate at the center of the camera, allowing the quick removal of the camera from the cage. A Metabones adapter is built into the cage and allows for easy changing of the lens and provides extra support to prevent stress on the camera when using longer lenses. The clip-on matte box controls light from entering the lens and allows you to apply and adjust filters. It features a swing-away system with an 82mm filter ring and two 4 x 5.6" rotating filter stages. This matte box comes with top and side flags, and six step-up rings from 82mm to 52, 58, 62, 67, 72, and 77mm.

The follow focus system is designed to mount onto the standard 15mm rods included with the cage. It can be instantly attached or detached from the rods using a lever clamp system and can swing away for lens changes. The focus ring is surrounded by a ring of rubber that provides a firm contact with the lens and ensures accurate and slip-free focusing. The focus mechanism can be used on the left or right side of the lens, and five drive gears are included to fit a variety of lenses: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. There are also four white marking disks included which attach to the wheel via magnets.

SHAPE Follow Focus Kit with Single 15mm Rod Clamp

Use the compact SHAPE Follow Focus Kit with Single 15mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.

At the core of the kit is a rubber, anti-slip follow focus wheel attached to a single aluminum 15mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses.

Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses.

For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel.

• Modular design allows for addition and removal of components without tools or screws. Its compact size allows it to fit easily with lens accessories like a matte box.
• The rubber follow focus wheel is attached to an adjustable, aluminum 15mm rod clamp which can swing away when changing lenses.
• The focus wheel fits most lens sizes. Five drive gears are included: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T.
• A rubber friction wheel is included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses.
• An 11" whip and a speed crank are included. Each connects to the focus wheel for fine adjustments.
• Four magnetic marking disks are included to attach to the focus wheel.

SHAPE 2-Stage 4 x 5.6" Matte Box

The 2-Stage 4 x 5.6" Matte Box from SHAPE can be used as a clip-on matte box or can be mounted on industry-standard 15mm rod system. It is designed for light control, insertion, and adjustment of filters. It features a two-stage rotating 4 x 5.6" filter holder. The matte box accepts lenses with a front diameter up to 114mm. It comes with six step-down rings that allow you to fit lenses with an outer diameter of 52, 58, 62, 67, 72, 77, and 82mm as well.

Compatibility

Photo lenses with a minimum diameter of 52mm

Professional video optics with up to 114mm front diameter

Includes 6 step-down rings (52 to 82, 58 to 82, 62 to 82, 67 to 82, 72 to 82, 77 to 82mm)

Made in Canada