SHAPE Canon C500 Mark II Shoulder Mount

The SHAPE Canon C500 Mark II Shoulder Mount consists of SHAPE's C500 Mark II 15mm Lightweight Baseplate, Quick Handle Rod Block, Mini Composite Shoulder Pad, Back Pad, and a pair of 18" long 15mm support rods to provide you with a comfortable shoulder-mounted handheld rig for use with the Canon C500 Mark II.

The Quick Handle Rod Bloc mounts on the rods and feature the SHAPE push-button adjustment feature, while the Mini Shoulder Pad mounts onto the lightweight baseplate and provides an attachment point for the Back Pad, which allows you to pull the rig forward and stabilize it against your back.

SHAPE Canon C500 Mark II Adapter Plate

Designed to mate perfectly with your C500 Mark II, the SHAPE Canon C500 Mark II Adapter Plate features three holes for camera tie-down screws. This provides support to your camera as well as for protecting your camera's underside from repeated attachment to and removal from tripod plates.

The plate centers your camera left to right for mounting on tripods or other mounting adapters, so that matte boxes and other rod-mounted accessories line up correctly when your camera with adapter plate is mounted on a baseplate that features support rods. The bottom of the adapter plate has five 3/8"-16 and four 1/4"-20 threaded mounting holes in a straight line that allow you to adjust the position and balance of your camera forward and back when mounted on a baseplate or directly on a tripod. An included Allen wrench tightens the cap head screws that mount the plate onto your camera. This is for the adapter plate only.

SHAPE 15mm Aluminum Rods (Pair, 12")

This pair of Shape 15mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

SHAPE Quick Handle + Rod Block

The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal.

Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.

SHAPE Mini Composite Shoulder Pad

The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into.

SHAPE Back Pad

The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally.

Compatible Support Series

• Composite
• Cameleon
• Sumo
• Spider

SHAPE 15mm Rods (18", Pair)

These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps.

• Pair of aluminum support rods for 15mm rod clamps.
• 18" long rods with chamfered ends that guide the rod into an available rod clamp, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.