SHAPE Offset Shoulder Mount Kit for Blackmagic Design Pocket Cinema 6K and 4K Camera

The SHAPE Offset Shoulder Mount Kit for BMPCC 6K and 4K Camera works to secure the Blackmagic Pocket Cinema 6K or 4K camera with a CNC machined aluminum cage with 1/4"-20 threaded holes on the top and bottom. This camera mount includes a top handle with a push button, a 15mm LW quick release rod base system, an offset rail 15mm rod bloc, two 10" 15mm rods, two 12" 15mm rods, a pair of quick handles with a push button, a shoulder mount, and a back pad.

SHAPE Cage for Blackmagic Pocket Cinema Camera 6K and 4K

The Cage for Blackmagic Pocket Cinema Camera 6K and 4K from SHAPE provides a formfitting base for attaching accessories, handles, or grips to your BMPCC 6K or 4K. Accessory mounting options include one cold shoe and multiple 1/4"-20, 3/8"-16, and ARRI anti-twist threads.

Constructed from lightweight yet sturdy CNC-machined aluminum, the cage includes a left-side clamp to prevent your HDMI cable from accidentally disconnecting. A padded hand strap adds comfort when grasping the right side of the camera. All controls, ports, and slots remain accessible when the cage is mounted to your Blackmagic Cinema Camera 6K or 4K.

• Formfitting CNC-machined aluminum cage for Blackmagic Design's Pocket Cinema Camera 6K or 4K
• Maintains access to all camera controls, ports, and slots</li
• Multiple 1/4"-20, 3/8"-16, and ARRI anti-twist mounting threads, one cold shoe mount</li
• HDMI cable clamp prevents accidental cable disconnection</li
• Padded hand strap for grasping camera on right side</li

SHAPE Off-Set Bracket for Blackmagic Cage

The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount.

SHAPE 15mm Aluminum Rods (Pair, 10")

This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

SHAPE 15mm Aluminum Rods (Pair, 12")

This pair of Shape 15mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

SHAPE Quick Handle + Rod Block

The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal.

Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.

SHAPE Mini Composite Shoulder Pad

The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into.

SHAPE Back Pad

The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally.