Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Teradek RT MDR-MB Wireless Lens Control Kit with 4-Axis Transmitter

$5,299.95
SKU
69308
MPN
15-0017
  • 4-Axis MK3.1 Transmitter/Controller
  • 2-Channel Latitude Receiver
  • Compact Battery-Powered Receiver
  • Includes MK3.1 Motor with Drive Cable
  • Customizable Camera Controls
  • Approx. 3000' Range
  • Expandable with Motors and Thumbwheels
  • Includes Hard Case

The Teradek RT MDR-SK Wireless Lens Control Kit with 4-Axis Transmitter for RED is an all-inclusive, single-motor setup that allows for the controlling of cinema lenses. The kit integrates a 4-axis MK3.1 transmitter, a 2-channel battery-powered Latitude receiver motor driver, and a single MK3.1 lens control motor. While the receiver can be powered off an external source, the MDR-MB can be powered off the included LP-E6-type battery, convenient for compact setups.The components can be stored in a hard case during transport and storage.

Teradek's RT MK3.1 4-Axis Wireless Controller enables you to regulate up to four lens motors, or other controls such as 3D functions (receiver and motors available separately). This controller offers a large focus knob, one slider control, and two side knobs (A and B). Each input on the versatile MK3.1 Controller can be mapped to any lens axis (focus, iris, zoom, or 3D function) as you prefer. In addition to F/I/Z control, the MK3.1 system enables you to remotely start/stop select HD cameras such as ARRI, Blackmagic, Phantom Flex, RED, Sony, and LANC-compatible models.

The mini RT MDR-MB Receiver (1-2 Axis) is part of the Latitude lens control system operating via both RF (wireless) and WiFi. This receiver's 0.6-mile wireless range is handy for drone use and for when you're operating in harsh RF environments like stadiums. Expanding upon the camera run/stop function of the RT MK3.1, the MDR-MB's WiFi connectivity provides camera control for RED DSMC2/DSMC cameras (with additional cameras to be added via a firmware update). This Latitude receiver is compatible with RT MK3.1 controllers and motors, driving up to two lens motors with functions such as focus, iris, and/or zoom (controller and motors available separately).

Teradek's RT MK3.1 Brushless Lens Motor is designed to remotely control your lens focus, iris, or zoom, or other function. The MK3.1 motor operates smoothly and quietly, even during slow, high-torque moves. This brushless motor features electronic backlash-compensation, a high-resolution encoder, and an integrated heat sink. For optimal flexibility, a gear can be attached to either side of the MK3.1 Motor, expanding position choice to either side of the lens, depending on your camera configuration.

Use the 8" RT Latitude MDR Motor Cable to connect the MDR lens motor to a Latitude MDR or MK3.1 receiver. Design features include thin, ultra-flexible cable, and two right-angle connectors. This cable is designed to exit the motor in a vertical position, creating a neat, compact route to the Latitude MDR receiver (however, the angle points downwards from the MK3.1 receiver).

Use the 10" RT Latitude MDR Camera Control Cable to connect the MDR receiver to a RED DSMC2/DSMC camera with a control port. Design features include two straight LEMO connectors, and a shorter length than the 16" version of this cable. This cable will trigger the run/stop function on the camera, control EF-mount lenses, and more.

Teradek's Cheeseplate for RT MDR-SK plate attaches to the RT Latitude MDR-SK DSMC2 module, or to the RED DSMC2 brain's Sidekick slot. This plate features multiple 1/4"-20 threaded holes for attaching various accessories.

The 16" RT MDR Power Cable connects power to the Latitude MDR receiver from a battery with a D-tap output port. This cable is designed with a right-angled, 4-pin, Hirose connector on one end, and a straight, D-Tap connector on the other.

Use the 6.6' RT Wired-Mode Controller Cable to connect an RT controller to an RT receiver in settings like hospitals where wireless use is not practical, or not permitted. This cable is compatible with the MK3.1 Controller, MK3.1 Receiver, all Latitude MDR models, Smartknob, other RT controllers, and supported OMOD controls.

Use the RT MK3.1 System Case to transport a complete MK3.1 lens control system. The interior of this hard case has a foam interior custom-cut to fit up to three lens motors, one receiver, eight marking disks, and accessories such as a thumbwheel. The MK3.1 System Case is a dust-proof, waterproof case with an integrated pressure valve. Your receiver and motors may be stored attached to their mounting brackets, saving you time when reassembling the system.

The RT Controller Neck Strap from Teradek is designed to carry the MK3.1 controller hand unit. Use this strap to position the control unit around your neck or across your body, or to drape the controller from a stand when not in use.

The Paralinx 7.4V/2000mAh Li-Ion Battery from Teradek is a Canon LP-E6-style battery designed for powering the Paralinx Triton transmitter unit. It features a capacity of 2000mAh and 7.4V of output and can power the receiver for approximately 2 to 3 hours. It attaches directly to the compatible battery plate on the transmitter unit.

The Paralinx Battery Charger from Teradek is designed for charging the LP-E6 compatible 7.4V/2000mAh battery pack for the Paralinx Triton transmitter unit.

The White Marking Disk for RT MK3.1 Controller from Teradek works with the RT MK3.1 hand unit. Use this beveled disk for marking focus distances or iris stops. Marks from non-permanent and china markers are easily removed; use isopropyl alcohol to clean notations made with permanent markers.

More Information
SKU 69308
Specifications "

RT MK3.1 4-Axis Wireless Lens Controller

Power Requirements Canon LP-E6 Battery: 6.2 to 8.4 V
USB Port: 4.75 to 9 V (maximum)
Transmission Rate: 16-bit
Range: 0.9 miles (1.5 km)
Latency 2 ms
Certifications FCC/IC/CE
Mounting Options 3 x 1/4"-20 holes
1 x lanyard mount
Material of Construction Aerospace-grade aluminum billet
Dimensions Excluding Knob: 5.5 x 2.8 x 1.2" (140 x 70 x 31 mm)
Including Knob & Antenna: 6.1 x 4.3 x 3" (155 x 110 x 75 mm)
Weight 1.3 lb (576 g)

RT Latitude MDR-MB Receiver (1-2 Axis, with Battery Plate)

Interface - Connectors 1 x Power-In: 2-pin LEMO 0B, 7-17 V DC
2 x Accessory In: 5-pin LEMO 0B
1 x Motor: 4-pin LEMO 0B
(Use separately available breakout cable to control 2 x motors)
1 x Control (Camera): 4-pin LEMO 00B
(RS-232 for RED control, serial control for LANC
"
Customer Reviews Copyright © 2018 Filmtools, a Magnasync/Moviola Company.