The Vaxis ATOM 500 SDI Wireless Video Transmitter and Receiver Kit (SDI/HDMI) enables transmitting visually lossless, H.265 video signals to the Vaxis receiver with less than 80 ms latency. The transmitter sends a powerful line-of-sight signal up to 500' and it can also multicast via Wi-Fi to up to three mobile devices for monitoring. The transmitter features one 3G-SDI and one HDMI input while the receiver has one 3G-SDI and one HDMI output. Each unit features a bright, clear OLED display and they have a cooling fan that can be turned on and off to prevent noise during your production. They can be powered using its USB Type-C connector with the included cable or by using a separately available L-series battery. The USB input can also be used to upgrade the firmware.
Wireless
Wireless Range
500' / 152.4 m (Line-of-Sight)
# of Channels
13
Frequency Range
US: 5.1 to 5.9 GHz
Latency
< 80 ms
RF Power
17 dBm
RF Sensitivity
-80 dBm
Wireless Video Compression
Compressed
Interfaces
Transmitter Video Connectors
1 x BNC (3G-SDI / HD-SDI / SD-SDI) Input 1 x HDMI (HDMI 1.4) Input
Receiver Video Connectors
1 x BNC (3G-SDI / HD-SDI / SD-SDI) Output 1 x HDMI Output
Embedded Audio SDI: 2-Channel
HDMI: 2-Channel
Format Support
Broadcast System Compatibility
NTSC, PAL
Video Format
SDI/BNC: 1080p at 25, 29.97, 30, 50, 59.94, 60 fps 1080i at 50, 59.94 fps 720p at 60 fps
HDMI: 1080p at 24, 25, 30, 50, 60 fps 1080i at 50, 60 fps 720p at 60 fps
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.