Zacuto ACT Recoil Rig for Z CAM E2 Series

The Zacuto ACT Recoil Rig for Z CAM E2 Series is made up of the ACT Baseplate, the Z-CME2 Cage, a right-hand wooden trigger grip, the Tactical Handle, and the Axis Micro EVF mounting arm. The ACT open design allows you to support your rig on your shoulder while remaining highly adjustable, allowing you to add more accessories and additional rig components if required.

The modular Zacuto ACT Recoil Rig for Z CAM E2 Series cage is specifically designed for Z CAM E2 series cameras and provides multiple 1/4"-20 and 3/8"-16 accessory threads, two rosettes, and a Z-Rail. The cage mounts onto the shoulder-mount baseplate, which features 15mm rods and rod ports on the front and back, and it features an Arca-type quick release plate. The wood right-hand grip can be mounted onto one of the 15mm rods and can adjust to your preferred position, and the tactical handle can be attached as a top handle or used on the left side if desired. The Axis Micro allows you to mount the ACT EVF Pro or monitor onto one of the 15mm baseplate rods.

Zacuto ACT Baseplate

Mount your DSLR or mirrorless camera such as a Panasonic GH5 Mark II and additional accessories such as a matte box, follow focus, or extension arms using the ACT Baseplate from Zacuto. The baseplate features a built-in shoulder pad, an Arca-type mounting plate, a quick release Arca-type camera plate, 15mm rod ports on the front and back, two 15mm rods, and stylish red locking levers all around.

The 15mm rods can be installed in the front or back of the plate, and they are secured with a quick release design. The Arca-type bottom plate can be mounted onto the ACT Mounting Plate or other Arca-compatible mounts. The red Arca-type camera plate features quick release functionality, pads to prevent twisting or slipping, and it's inset into the baseplate for a low-profile design. Scale markings along the top assist with balancing.

Key Features

• For DSLR or mirrorless cameras such as the Panasonic GH5 Mark II
• 15mm LWS front and rear rod ports
• Arca-style quick release plate
• 1/4"-20 and 3/8"-16 tripod mount holes
• Built-in ergonomic shoulder pad
• Two 15mm rods
• Scale markings for balance
• Zacuto Right-Hand Wood Trigger Grip

The Right-Hand Wood Trigger Grip from Zacuto is a highly adjustable wooden grip that mounts onto a 15mm rod and provides right-handed support for your camera cage or rig. It enables full 360° rotation with the press of a button trigger.

Zacuto Axis Micro EVF Mount

Attach a rosette-mounted EVF to your camera or rig with the Axis Micro from Zacuto. This adjustable mounting arm, slightly more compact than its big sister the Axis Mini, is designed to attach to the top of your camera setup using its micro 15mm rod to provide you with ample room for adjusting focus or working with large lenses. It attaches directly to rigs fitted with a 15mm rod port and mounts EVFs, such as the ACT EVF Pro or Gratical HD, using its secure 1/4"-20 rosette.

Zacuto Tactical Handle

Add a versatile handle to your camera rig or cage with the Tactical Handle from Zacuto, which features a slim, adjustable design that allows you to use it as a top handle or side handgrip. It features a built-in Z-Rail/NATO-type rail on top, a shoe mount, and multiple 1/4"-20 and 3/8"-16 mounting threads that enable you to mount a variety of accessories. Its grip features finger grooves and is lined with wood for a smooth, comfortable feel. The Tactical Handle mounts onto any Z-Rail/NATO rail, and the Z-Rail jaw clamp can be twisted and oriented in multiple ways to work on horizontal or vertical Z-Rails. The spring-loaded locking lever enables tightening or loosening of the joint, so it can be reconfigured as a top or side handle. The handle is suitable for use with small cameras such as the Panasonic GH5 Mark II.

Compatibility

Small mirrorless and DSLR cameras such as the Panasonic GH5 Mark II Also compatible with but not limited to: Zacuto 3" Z-Rail Zacuto 5" Z-Rail Zacuto Universal Monitor Mount Zacuto ACT Recoil Shoulder Rig Zacuto DSLM or DSLM Cage Zacuto Axis Mini Mount Zacuto Axis Micro Mount Zacuto EVF Mounts

Zacuto Z CAM E2 Series Flagship Cage

The Z CAM E2 Series Flagship Cage from Zacuto protects your E2 series camera while providing a variety of accessory mounting options. This dedicated, modular cage includes Z-Rail on the top and sides, 1/4"-20 and 3/8"-16 anti-twist mounts, and two ARRI-style rosettes for attaching handgrips or other components. The cage is compatible with Z CAM E2, E2G, E2-S6, E2-F6, and E2-F8 camera bodies.

This cage is comprised of six components including a top plate, two side plates, one USB cable clamp, and one HDMI cable clamp. Access to controls and ports is maintained when the cage is mounted on your camera, and the bottom is both Zacuto Polaris and Arca-Swiss compatible.

Note:

Not compatible with the Z CAM E2C.

Compatibility

Z CAM E2, E2G, E2-S6, E2-F6, and E2-F8 cameras