Zacuto C100 Mark II EVF Recoil with Dual Trigger Grips

$1,710.00
SKU
72406
MPN
Z-C1002ER-PDG
  • Shoulder Rig for Canon C100 Mark II
  • 360° Adjustable Dual-Handgrip System
  • Helmet with Multiple Accessory Mounts
  • Balances Weight of Rig over Shoulder
  • VCT Pro Baseplate with 15mm Rods
  • 10" Horizontal, 1" Vertical Adjustment
  • Slide-In Camera Plate
  • Made in the USA

The Zacuto C100 Mark II EVF Recoil with Dual Trigger Grips is a shoulder rig that is compatible with the Canon C100 Mark II camera. When purchasing this rig, you will receive the Zacuto Canon Dual Trigger Grips which have a 360° rotating handgrip system, as well as the Zacuto C100 Mark II Helmet, ideal for attaching additional accessories with the help of the Z-rail and threaded mounts, and the VCT Pro Baseplate - everything you need to head out on a shoot with your camera ready and secure on your shoulder. 

This Recoil rig distributes your focus, monitoring, and camera controls forward, creating an evenly balanced handheld or tripod-based C100 Mark II rig. The right-hand component of the Dual Trigger Grips relocates your original Canon handgrip to a more comfortable operating position.

Note: This rig requires the addition of a monitor or Zacuto Gratical EVF.

VCT Pro Baseplate

The Zacuto VCT Pro Baseplate features a built-in curved shoulder pad, an Arri M6 rosette, quick-release 6.5" rods and lightweight rod ports. The v-wedge tripod connector is compatibe with the VCT14 tripod adapter plates or can be connected to your tripod quick release plate via the 1/4-20" and 3/8-16" screw holes. The Pro baseplate is compatible with al lcameras including Canon EOS C-series, Sony FS4 and FS7, AJA CION, BlackMagic, RED cameras, ARri Alexa and Amira, DSLRs, Mirrorless and more. 

The red sliding top plate offers easy adjust-ability for lens changes, removing your camera, and balancing your rig correctly on your shoulder. This sliding plate combined with a double screw track offers 10” of camera balance sliding range. You can quickly release your camera from the rig by sliding the red plate completely off and using our VCT Pro Dock to quickly transition it to a tripod, slider, etc.

The lightweight, adjustable rod mount is set far back in the plate, offering plenty of accessory-capable area under the camera lens. This allows you to position your camera further back on the plate, keeping the balance point of your rig directly over your shoulder. The sliding track of the rod riser offers 25mm of vertical adjustment. (Alternate Tall Rod Riser offering up to 45mm of vertical adjustment - for RED cameras - is available. Contact sales@zacuto.com for more information.)

The shoulder pad portion of the VCT Universal is set as far forward on the plate as possible, also to maximize your accessory capable rod area and aid with balance. The VCT Universal Baseplate is the core of our Next Generation Recoil rigs, designed for balance and comfort for every camera.

Key Features

  • Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
  • 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
  • VCT14-compatible V-wedge
  • 1/4"-20 and 3/8"-16 tripod mount holes
  • Ergonomic gel polymer shoulder pad
  • 15mm LWS rod adapter on the rear
  • Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
  • ARRI M6 rosette
  • Three 1/4"-20 threaded holes for accessories
  • Includes two 6.5" 15mm rods
  • 1/4"-20 and 3/8"-16 screws supplied
  • Made in the USA

Canon Dual Trigger Grips

The Zacuto Canon Dual Trigger Grips are made compatible with the Canon C100, C300 and C500 camera grips. The set up features a 15mm LWS rod mount handgrip with a wooden handgrip and a grip relocator. With the help of a lever that you can press, each individual grip can be rotated at a full 360°. You do not have to worry about screwing or unscrewing any knobs, which makes the set easy-to-use and convenient. Another lever allows you to adjust the wooden component of the wooden handgrip. It can be adjusted either backward or forward, just like your camera grip once it has been attached. 

The handgrip and relocator are secured into sleeves and can be adjusted in length within the sleeves by loosening a corresponding lever for each one. They can be adjusted from 13 to 16" in length, measuring from the base to the bottom of the handgrip. Scale markings are available on top to allow you to easily match up the positions of the handgrips. The handgrips are fully removable and you can incorporate a second wooden handgrip at a later time to alternate with the relocator.

Key Features

  • 15mm LWS rod mount handgrip set
  • Includes a wooden handgrip and a grip relocator for Canon C100/C300/C500 camera grips
  • 360° rotation at the press of a lever — no screwing/unscrewing
  • Forward/backward adjustment at the press of another lever
  • Length adjustable
  • Scale markings for easily matching the positions of the handgrips

C100 Mark II Helmet

The Zacuto C100 Mark II Helmet is compatible with the Canon C100 Mark II camera body. It attaches to the cop of the camera, which offers a sturdier connection point for the camera's top handle. Additionally, it gives you the ability to slide the handle forward and backward for balancing. When purchasing the Zacuto C100 Mark II Helmet, you will receive the helmet itself, along with a 5" Z-rail and a double-jawed Z-Rail lock. The lock allows for secure attachment of the top handle. 

The helmet attaches via one screw on top and one on the side, replacing the film plane screw on the left side of the camera. The Z-rail screws to the top of the Helmet and, in addition to the 5" rail, adds a 15mm rod port in the rear for mounting an optional Axis Mini or other 15mm rod accessory. For additional accessory mounting, the helmet features 1/4"-20 threaded holes on all sides.

Key Features

  • Helmet with 1/4"-20 accessory threads
  • 5" Z-rail with 15mm rod port
  • Double-sized Z-Rail jaws for secure attachment of C100 Mark II's top handle to the Z-rail
  • Enables forward and backward top handle position adjustment for balancing
  • Spring-loaded ratcheting levers for rod port and Z-rail jaws
More Information
SKU 72406
Specifications

VCT Pro Baseplate

Mount Types VCT14-compatible V-wedge
15 mm LWS rod ports in front and back
1/4"-20 and 3/8"-16 tripod mount holes
1/4"-20 and 3/8"-16 camera screws included
6.5" (16.5 cm) 15mm rods included
ARRI M6 rosette
Three 1/4"-20 threaded holes for accessories
Dimensions 14.25 x 4.25 x 2" (36.2 x 10.8 x 5 cm) (with included 6.5"/16.5 cm rods)
Weight 2.1 lb (0.96 kg)

Packaging Info

Box Dimensions (LxWxH) 10.7 x 7.2 x 3.7"

Canon Dual Trigger Grips

Material of Construction Aluminum, wood

Packaging Info

Box Dimensions (LxWxH) 14.2 x 7.9 x 2.4"

C100 Mark II Helmet

Accessory Mount Threads 1/4"-20
Rail Length 5" (12.7 cm)

Packaging Info

Box Dimensions (LxWxH) 1.7 x 1.3 x 0.3"

Related products

Check items to add to the cart or
Customer Reviews Copyright © 2018 Filmtools, a Magnasync/Moviola Company.