Zacuto EVA1 EVF Recoil Pro with Dual Trigger Grips

$1,425.00
SKU
72468
MPN
Z-EVA-ERPDG
  • VCT Pro Baseplate
  • EVA1 Dual Trigger Grip
  • Top Handle with Z-Rail and Cold Shoe
  • 15mm Rod Lock for Top Handle
  • Top Plate with Z-Rail for Panasonic EVA1

The Zacuto EVA1 EVF Recoil Pro with Dual Trigger Grips is a shoulder rig that is compatible with the Panasonic EVA1 camera. When purchasing this rig, you will receive the VCT Pro Baseplate, as well as the EVA1 Dual Trigger Grip, a Top Handle with 15mm Rod Lock, and the EVA1 Top Plate. To ensure that the rig is balanced correctly, Zacuto put this rig together following their Recoil Rig philosophy. This means that the balance point is placed directly over your shoulder. The camera body is behind your shoulder, which relocates focus, monitoring, and camera controls forward. This system makes for a lighter, shorter, and properly balanced rig. 

The VCT Pro plate supports the camera and features 10" of forward/back balance adjustment, and it includes 15mm rods and rod clamps for rod-mounted accessories. The VCT Pro also enables your rig to go from your shoulder to tripod and back without removing accessories. The Dual Trigger Grip features a left and right articulating arm and relocates the EVA1's handgrip to the right articulating arm so you can use all the grips functions while comfortably supporting the rig on your shoulder. The EVA1 Top Plate mounts on your camera and provides the capability to attach accessories to your camera without stressing your camera's body. The included Top Handle and Rod Lock provide a contoured wood handle and 15mm rod clamp that you can mount to the Top Plate for improved ergonomics and LCD mounting options.

VCT Pro Baseplate

The Zacuto VCT Pro Baseplate features a built-in curved shoulder pad, an Arri M6 rosette, quick-release 6.5" rods and lightweight rod ports. The v-wedge tripod connector is compatibe with the VCT14 tripod adapter plates or can be connected to your tripod quick release plate via the 1/4-20" and 3/8-16" screw holes. The Pro baseplate is compatible with al lcameras including Canon EOS C-series, Sony FS4 and FS7, AJA CION, BlackMagic, RED cameras, ARri Alexa and Amira, DSLRs, Mirrorless and more. 

The red sliding top plate offers easy adjust-ability for lens changes, removing your camera, and balancing your rig correctly on your shoulder. This sliding plate combined with a double screw track offers 10” of camera balance sliding range. You can quickly release your camera from the rig by sliding the red plate completely off and using our VCT Pro Dock to quickly transition it to a tripod, slider, etc.

The lightweight, adjustable rod mount is set far back in the plate, offering plenty of accessory-capable area under the camera lens. This allows you to position your camera further back on the plate, keeping the balance point of your rig directly over your shoulder. The sliding track of the rod riser offers 25mm of vertical adjustment. (Alternate Tall Rod Riser offering up to 45mm of vertical adjustment - for RED cameras - is available. Contact sales@zacuto.com for more information.)

The shoulder pad portion of the VCT Universal is set as far forward on the plate as possible, also to maximize your accessory capable rod area and aid with balance. The VCT Universal Baseplate is the core of our Next Generation Recoil rigs, designed for balance and comfort for every camera.

Key Features

  • Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
  • 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
  • VCT14-compatible V-wedge
  • 1/4"-20 and 3/8"-16 tripod mount holes
  • Ergonomic gel polymer shoulder pad
  • 15mm LWS rod adapter on the rear
  • Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
  • ARRI M6 rosette
  • Three 1/4"-20 threaded holes for accessories
  • Includes two 6.5" 15mm rods
  • 1/4"-20 and 3/8"-16 screws supplied
  • Made in the USA

Panasonic EVA1 Dual Trigger Grips

The Zacuto Panasonic EVA1 Dual Trigger Grips are made compatible with the Panasonic EVA1 camera grip. The set up features a 15mm LWS rod mount handgrip with a wooden handgrip and a grip relocator. With the help of a lever that you can press, each individual grip can be rotated at a full 360°. You do not have to worry about screwing or unscrewing any knobs, which makes the set easy-to-use and convenient. Another lever allows you to adjust the wooden component of the wooden handgrip. It can be adjusted either backward or forward, just like your camera grip once it has been attached.

The handgrip and relocator are secured into sleeves and can be adjusted in length within the sleeves by loosening a corresponding lever for each one. They can be adjusted from 13 to 16" in length, measuring from the base to the bottom of the handgrip. Scale markings are available on top to allow you to easily match up the positions of the handgrips. The handgrips are fully removable and you can incorporate a second wooden handgrip at a later time to alternate with the relocator.

Key Features

  • 15mm LWS rod mount handgrip set
  • Includes a wooden handgrip and a grip relocator for the Panasonic EVA1 camera grip
  • 360° rotation at the press of a lever — no screwing/unscrewing
  • Forward/backward adjustment at the press of another lever
  • Length adjustable
  • Scale markings for easily matching the positions of the handgrips

Top Handle with Z-Rail and Cold Shoe Mount

The Zacuto Top Handle with Z-Rail and Cold Shoe Mount is compatible with a large variety of accessories, thanks to the single 3/8"-16 and multiple 1/4"-20 threaded mounting holes. The Top Handle offers a built-in Z-Rail and cold shoe, alone with an orientable Z-Rail clamp. The entire unit has a slim design, and the wood grip is made to fit comfortably in your hand. 

The Top Handle attaches to any Z-Rail dovetail, and the Z-Rail jaw clamp can be oriented multiple ways to work on horizontal or vertical Z-Rails. The spring-loaded locking lever enables tightening or loosening of the clamp even when you don't have room to fully rotate the lever. It releases quickly with the flip of a mini ratcheting lever. This is well suited for mounting to the GH5 cage or using on your Recoil rigs.

  • Zacuto dovetail accessories are adjustable to work with Z-Rail, NATO, SWAT, RED, Picatinny, and Wooden Camera rails.

15mm Rod Lock for Top Handle

The Zacuto 15mm Rod Lock for Top Handle is compatible with the Zacuto Top Handle. It slides right into the cold shoe and two screws help secure it. This adds a 15mm rod clamp, and the purpose of this rod lock is to allow you to be able to mount a variety of accessories, including but not limited to the Axis Mini EVF Mount. The Zacuto 15mm Rod Lock also comes with a removable cold shoe mount, that way you don't lose the handle cold shoe that it is mounted on. 

More Information
SKU 72468
Specifications

VCT Pro Baseplate

Mount Types VCT14-compatible V-wedge
15 mm LWS rod ports in front and back
1/4"-20 and 3/8"-16 tripod mount holes
1/4"-20 and 3/8"-16 camera screws included
6.5" (16.5 cm) 15mm rods included
ARRI M6 rosette
Three 1/4"-20 threaded holes for accessories
Dimensions 14.25 x 4.25 x 2" (36.2 x 10.8 x 5 cm) (with included 6.5"/16.5 cm rods)
Weight 2.1 lb (0.96 kg)

Packaging Info

Box Dimensions (LxWxH) 10.7 x 7.2 x 3.7"

Panasonic EVA1 Dual Trigger Grips

Material of Construction Aluminum, wood

Packaging Info

Box Dimensions (LxWxH) 8.6 x 6.0 x 2.2"

Top Handle with Z-Rail and Cold Shoe Mount

Material of Construction Anodized aluminum
Maple
Mounting Z-Rail clamp
Accessory Mounting Z-Rail
1 x Cold shoe
8 x 1/4"-20
1 x 3/8"-16
Dimensions 0.83 x 5.15 x 2.49" / 2.11 x 13.08 x 6.32 cm
Weight 4.8 oz / 136.1 g

Packaging Info

Box Dimensions (LxWxH) 5.1 x 4.4 x 1.3"

15mm Rod Lock for Top Handle

Dimensions 0.83 x 2.22 x 1.5" / 2.11 x 5.64 x 3.81 cm
Weight 0.75 oz / 21.26 g

Packaging Info

Box Dimensions (LxWxH) 5.0 x 3.0 x 1.0"

Top Plate with Z-Rail for Panasonic EVA1 Camera

Packaging Info

Box Dimensions (LxWxH) 6.4 x 3.3 x 0.9"
Customer Reviews Copyright © 2018 Filmtools, a Magnasync/Moviola Company.