Zacuto EVF Recoil Pro with Dual Trigger Grips for Canon C300 Mark II

$1,852.50
SKU
72430
MPN
Z-C3002ER-PDG
  • 360° Adjustable Dual-Handgrip System
  • Relocates C300 Trigger Grip
  • VCT Pro Baseplate
  • C300 Mark II Helmet Kit
  • Recoil Handle Top Grip and 3" Z-Rail
  • 1/4"-20 and & 3/8"-16 Mounting Holes

The Zacuto EVF Recoil Pro with Dual Trigger Grips for Canon C300 Mark II is a rig that is compatible with the Canon C300 Mark II camera. When purchasing this rig, you will receive the Zacuto C300 Mark II Helmet Kit, as well as the Zacuto Canon Dual Trigger Grips, and the VCT Pro Baseplate. To ensure that the rig is balanced correctly, Zacuto put this rig together following their Recoil Rig philosophy. This means that the balance point is placed directly over your shoulder. The camera body is behind your shoulder, which relocates focus, monitoring, and camera controls forward. This system makes for a lighter, shorter, and properly balanced rig. 

The C300 Mark II Helmet Kit includes a custom-designed top plate to fit your C300 Mark II, providing accessory mounting and forward or backward top handle adjustment for the included Recoil Handgrip. The handgrip is lined with maple wood and incorporates two cold shoes as well as a 15mm rod clamp. The Dual Trigger Grips enables mounting the camera's handgrip on an articulating extendable arm. The VCT Pro Baseplate includes 15mm rods and rod clamps for rod-mounted accessories, and enables balancing your camera on your shoulder or mounting on a tripod, swiftly going between the two without having to remove the rod-mounted accessories.

VCT Pro Baseplate

The Zacuto VCT Pro Baseplate features a built-in curved shoulder pad, an Arri M6 rosette, quick-release 6.5" rods and lightweight rod ports. The v-wedge tripod connector is compatibe with the VCT14 tripod adapter plates or can be connected to your tripod quick release plate via the 1/4-20" and 3/8-16" screw holes. The Pro baseplate is compatible with al lcameras including Canon EOS C-series, Sony FS4 and FS7, AJA CION, BlackMagic, RED cameras, ARri Alexa and Amira, DSLRs, Mirrorless and more. 

The red sliding top plate offers easy adjust-ability for lens changes, removing your camera, and balancing your rig correctly on your shoulder. This sliding plate combined with a double screw track offers 10” of camera balance sliding range. You can quickly release your camera from the rig by sliding the red plate completely off and using our VCT Pro Dock to quickly transition it to a tripod, slider, etc.

The lightweight, adjustable rod mount is set far back in the plate, offering plenty of accessory-capable area under the camera lens. This allows you to position your camera further back on the plate, keeping the balance point of your rig directly over your shoulder. The sliding track of the rod riser offers 25mm of vertical adjustment. (Alternate Tall Rod Riser offering up to 45mm of vertical adjustment - for RED cameras - is available. Contact sales@zacuto.com for more information.)

The shoulder pad portion of the VCT Universal is set as far forward on the plate as possible, also to maximize your accessory capable rod area and aid with balance. The VCT Universal Baseplate is the core of our Next Generation Recoil rigs, designed for balance and comfort for every camera.

Key Features

  • Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
  • 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
  • VCT14-compatible V-wedge
  • 1/4"-20 and 3/8"-16 tripod mount holes
  • Ergonomic gel polymer shoulder pad
  • 15mm LWS rod adapter on the rear
  • Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
  • ARRI M6 rosette
  • Three 1/4"-20 threaded holes for accessories
  • Includes two 6.5" 15mm rods
  • 1/4"-20 and 3/8"-16 screws supplied
  • Made in the USA

Zacuto Canon Dual Trigger Grips

The Zacuto Canon Dual Trigger Grips are made compatible with the Canon C100, C300 and C500 camera grips. The set up features a 15mm LWS rod mount handgrip with a wooden handgrip and a grip relocator. With the help of a lever that you can press, each individual grip can be rotated at a full 360°. You do not have to worry about screwing or unscrewing any knobs, which makes the set easy-to-use and convenient. Another lever allows you to adjust the wooden component of the wooden handgrip. It can be adjusted either backward or forward, just like your camera grip once it has been attached. 

The handgrip and relocator are secured into sleeves and can be adjusted in length within the sleeves by loosening a corresponding lever for each one. They can be adjusted from 13 to 16" in length, measuring from the base to the bottom of the handgrip. Scale markings are available on top to allow you to easily match up the positions of the handgrips. The handgrips are fully removable and you can incorporate a second wooden handgrip at a later time to alternate with the relocator.

Features:

  • 15mm LWS rod mount handgrip set
  • Includes a wooden handgrip and a grip relocator for Canon C100/C300/C500 camera grips
  • 360° rotation at the press of a lever — no screwing/unscrewing
  • Forward/backward adjustment at the press of another lever
  • Length adjustable
  • Scale markings for easily matching the positions of the handgrips

C300 Mark II Helmet Kit

The Zacuto C300 Mark II Helmet Kit was put together to help you attach the accessories you need to your C300 Mark II camera. This kit includes a Zacuto Recoil Top Handle, which will help secure your hold on your camera and make the operation of the camera easier, while the Zacuto C300 Mark II Helmet and the 3" Z-Rail allow you to mount accessories via their multiple 1/4"-20 and 3/8"-16 threaded accessory mounting holes.

This kit provides a simple yet flexible system for handling your camera. A system that you can adjust by sliding the recoil handle along the length of the 3" Z-rail to achieve comfortable operating balance of your camera. The handle includes two cold shoe mounts, and the helmet's accessory mounting holds increases the accessory options that you can use with your camera.

More Information
SKU 72430
Specifications

VCT Pro Baseplate

Mount Types VCT14-compatible V-wedge
15 mm LWS rod ports in front and back
1/4"-20 and 3/8"-16 tripod mount holes
1/4"-20 and 3/8"-16 camera screws included
6.5" (16.5 cm) 15mm rods included
ARRI M6 rosette
Three 1/4"-20 threaded holes for accessories
Dimensions 14.25 x 4.25 x 2" (36.2 x 10.8 x 5 cm) (with included 6.5"/16.5 cm rods)
Weight 2.1 lb (0.96 kg)

Packaging Info

Box Dimensions (LxWxH) 10.7 x 7.2 x 3.7"

Zacuto Canon Dual Trigger Grips

Material of Construction Aluminum, wood


Packaging Info

Package Weight 2.6 bls
Box Dimensions (LxWxH) 14.2 x 7.9 x 2.4"

C300 Mark II Helmet Kit

Packaging Info

Box Dimensions (LxWxH) 9.0 x 6.0 x 3.0"

Related products

Check items to add to the cart or
Customer Reviews Copyright © 2018 Filmtools, a Magnasync/Moviola Company.