- Affirm
- Paypal Credit
Zacuto C200 Recoil Pro V2

- Top Plate with Z-Rail for Canon C200 LCD
- Attaches to Top of Canon C200
- 5" Z-Rail with 15mm Rod Port
- Rosette Trigger Grip
- ARRI Rosette Mount Compatible
- Quick-Press 360° Rotation
- VCT Pro Baseplate
- 10" Track for Balance After Lens Swaps
- VCT-14 Compatible V-Wedge
The Zacuto C200 Recoil Pro V2 is a shoulder rig that is compatible with the Canon C200 camera. When purchasing the Zacuto C200 Recoil Pro V2, you will receive the VCT Pro Baseplate, the Rosette Trigger Grip, and the C200 Top Plate - everything you need to head out on a shoot with your camera ready and secure on your shoulder. To ensure that the Zacuto C200 Recoil Pro V2 is balanced correctly, Zacuto put this rig together following their Recoil Rig philosophy. This means that the balance point is placed directly over your shoulder. The camera body is behind your shoulder, which relocates focus, monitoring, and camera controls forward. This system makes for a lighter, shorter, and properly balanced rig.
The C200 Top Plate is custom-designed to fit your C200 and provides threaded accessory mounting holes, an integrated Z-Rail, and a 15mm rod clamp with a spring-loaded locking lever. The Trigger Grip enables mounting the camera's handgrip on an articulating extendable arm. The VCT PRO Baseplate enables balancing your camera on your shoulder or mounting on a tripod, and includes 15mm rods and rod clamps.
VCT Pro Baseplate
The Zacuto VCT Pro Baseplate features a built-in curved shoulder pad, an Arri M6 rosette, quick-release 6.5" rods and lightweight rod ports. The v-wedge tripod connector is compatible with the VCT14 tripod adapter plates or can be connected to your tripod quick release plate via the 1/4-20" and 3/8-16" screw holes. The Pro baseplate is compatible with all cameras including Canon EOS C-series, Sony FS4 and FS7, AJA CION, BlackMagic, RED cameras, Arri Alexa and Amira, DSLRs, Mirrorless and more.
The red sliding top plate offers easy adjust-ability for lens changes, removing your camera, and balancing your rig correctly on your shoulder. This sliding plate combined with a double screw track offers 10” of camera balance sliding range. You can quickly release your camera from the rig by sliding the red plate completely off and using our VCT Pro Dock to quickly transition it to a tripod, slider, etc.
The lightweight, adjustable rod mount is set far back in the plate, offering plenty of accessory-capable area under the camera lens. This allows you to position your camera further back on the plate, keeping the balance point of your rig directly over your shoulder. The sliding track of the rod riser offers 25mm of vertical adjustment. (Alternate Tall Rod Riser offering up to 45mm of vertical adjustment - for RED cameras - is available. Contact sales@zacuto.com for more information.)
The shoulder pad portion of the VCT Universal is set as far forward on the plate as possible, also to maximize your accessory capable rod area and aid with balance. The VCT Universal Baseplate is the core of our Next Generation Recoil rigs, designed for balance and comfort for every camera.
Key Features
- Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
- 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
- VCT14-compatible V-wedge
- 1/4"-20 and 3/8"-16 tripod mount holes
- Ergonomic gel polymer shoulder pad
- 15mm LWS rod adapter on the rear
- Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
- ARRI M6 rosette
- Three 1/4"-20 threaded holes for accessories
- Includes two 6.5" 15mm rods
- 1/4"-20 and 3/8"-16 screws supplied
- Made in the USA
Rosette Trigger Grip
The Zacuto Rosette Trigger Grip is an adjustable grip relocator for ARRI rosette-mount camera or lens grips. It's designed to attach to camera supports offering an ARRI rosette, including the Zacuto VCT Pro baseplate. The entire unit can be rotated a full 360° at the quick press of a lever, and the component that holds your grip can be adjusted forward and backward with the press of another lever. Unlike with standard handgrips, these levers don't need to be unscrewed and can just be pressed on the fly. The entire unit can also be adjusted in length by loosening another lever.
C200 Top Plate
The Zacuto C200 Top Plate is custom-designed for your Canon C200, forming the base for accessorizing your camera without stressing its body. It has a built-in Z-Rail which is perfect for adding the Recoil Handle, or you can attach your Canon Handle to the plate instead. It has a multitude of 1/4"-20 and 3/8"-16 screw holes. At the back of the plate is a 15mm rod clamp with a spring-loaded locking lever, and a grooved mount for the Canon C200 LCD. You can also mount the Canon LCD to the built-in Z-Rail if so desired.
Key Features
- The Top Plate features a built-in Z-Rail, 15mm rod clamp, and 51 1/4"-20 and two 3/8"-16 threaded mounting holes, all providing accessory mounting options to extend the ergonimics of your camera.
- The spring-loaded locking lever allows you to tighten or loosen the clamp, even when you can't rotate the level completely.
- VCT Pro Baseplate
- 2 x 6.5" 15mm Rods
- 1/4"-20 Camera Screw
- 3/8"-16 Camera Screw
- Limited Lifetime Warranty
- Rosette Trigger Grip
- Limited Lifetime Warranty
- C200 Top Plate
- 2 x 1/4"-20 Screw
- Limited Lifetime Warranty
SKU | 72422 | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brands | Zacuto | ||||||||||||||||||
MPN | Z-C2R-P2 | ||||||||||||||||||
Product Conditon | New | ||||||||||||||||||
Specifications | VCT Pro Baseplate
Rosette Trigger Grip
C200 Top Plate
Packaging Info
|